If you use vivid colors only, these elements may appear transparent. The elements in your design may be too thin.Įlements that are less than 1.0–mm thick do not print with a white core (if selected).When color accuracy is an issue, the possible causes may be: If the issue continues, please contact your local technical Support Center. Repeat the same process for Outbound Rules.Name the rule you just created (optional) and select Finish.In the Profile step, make sure that all profiles are selected and click Next.For Action, select Allow the connection and click Next.Repeat steps 8 and 9 for the remote IP address.Enter the following IP address ranges 10.10.20.1 - 10.10.20.2, as shown below, and click OK.For Scope, Local IP address, select These IP addresses and click Add.In the Protocol and Ports step, select Any and click Next.In the Program step, select All programs and click Next.In the Rule Type step, select Custom and click Next. ![]() The wizard will now guide you through each step for setting a new rule.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |